Sennheiser Work Light 830S User Manual

cordless TV listening system  
Set 830 S  
Instruction manual  
 
II  
D
8
C
9
B
0
A
H
G
F
E
 
 
Contents  
Contents  
Safety instructions ................................................................. 2  
Delivery includes ..................................................................... 4  
Product overview .................................................................... 5  
Putting the Set 830 S into operation ................................. 6  
Setting up the transmitter ............................................... 6  
Wearing the receiver around the neck ........................ 11  
for hearing aids to the receiver ..................................... 12  
Using the Set 830 S .............................................................. 13  
Switching the transmitter on/off ................................. 13  
Switching the receiver on/off ........................................ 14  
Adjusting the volume ...................................................... 14  
Searching for a sound source ......................................... 15  
Adjusting the balance ..................................................... 15  
Storing and charging the receiver ................................ 18  
What if... ................................................................................. 20  
...this indicator lights up? ............................................... 20  
...you press this button? ................................................. 20  
Cleaning the Set 830 S ........................................................ 23  
If a problem occurs ... ........................................................... 23  
Additional technical information ...................................... 26  
Accessories and spare parts ............................................... 29  
Specifications ........................................................................ 31  
Manufacturer Declarations ................................................. 33  
Index ........................................................................................ 34  
1
 
Safety instructions  
Safety instructions  
• Please read this instruction manual carefully and completely before  
using the devices.  
• Make this instruction manual easily accessible to all users at all  
times. Always include this instruction manual when passing the  
devices on to third parties.  
• Do not use the devices in situations which require special attention  
(e.g. when performing skilled jobs).  
• Always keep the devices dry and do not expose them to extreme  
temperatures.  
• Use the devices with care and set them up in a clean, dust-free  
environment.  
• Varnish or furniture polish may degrade the feet of the transmitter,  
which could stain your furniture. You should therefore place the  
transmitter on a non-slip pad to avoid potential staining of furni-  
ture.  
• This receiver allows you to set higher volumes than conventional  
headphones. This can cause hearing damage in persons with healthy  
hearing and especially in children.  
• Refer all servicing to qualified service personnel. Servicing is  
required if the devices have been damaged in any way, such as  
mains cable or plug damage, liquid has been spilled, objects have  
fallen inside, the devices have been exposed to rain or moisture, do  
not operate properly or have been dropped.  
• WARNING: To reduce the risk of fire or electric shock, do not expose  
the device and the mains unit to rain or moisture.  
• Use only the supplied mains unit.  
• Disconnect the mains connector from the wall socket  
– to completely disconnect the device from the mains,  
– during lightning storms or when unused for long periods of time.  
• Ensure that the mains unit is:  
– always readily operable and easily accessible,  
– properly plugged into the wall socket,  
– not covered or exposed to direct sunlight for longer periods of  
time in order to prevent heat accumulation,  
– only operated within the permissible temperature range (see  
– not operated near heat sources.  
2
 
 
Safety instructions  
Intended use of the devices  
Intended use includes:  
• having read this instruction manual, especially the chapter “Safety  
instructions”,  
• using the devices within the operating conditions and limitations  
described in this instruction manual.  
“Improper use” means using the devices other than as described in this  
instructions, or under operating conditions which differ from those  
described herein.  
Safety instructions for the Lithium-Ion rechargeable battery  
The BA 300 is a Lithium-Ion rechargeable battery. If abused or misused,  
this rechargeable battery may be damaged. Please understand that  
Sennheiser does not accept liability for damage arising from abuse or  
misuse.  
WARNING! In extreme cases, the rechargeable battery may even  
present a  
• heat hazard  
• fire hazard  
• explosion hazard  
• smoke and gas hazard  
Do not heat above  
70°C/158°F, e.g. do  
not expose to sunlight  
or throw into a fire.  
Only charge rechargeable  
batteries with the appro-  
priate Sennheiser chargers.  
Do not expose to  
moisture.  
When not using the  
rechargeable battery for  
extended periods of time,  
charge it regularly  
(every six months for  
about one hour).  
Do not short-circuit.  
Only charge rechargeable  
batteries at ambient  
temperatures between  
10°C and 40°C.  
Do not mutilate or  
dismantle.  
Do not charge the  
rechargeable battery if  
the device is obviously  
defective.  
Store the devices/  
Return defective devices  
or devices with defective  
rechargeable batteries to  
your specialist dealer.  
rechargeable batteries  
in a cool and dry place  
at room temperature.  
!
3
 
Delivery includes  
Delivery includes  
Delivery of the Set 830 S system includes:  
1 RI 830 S receiver  
with BA 300 Lithium-Ion rechargeable battery  
1 TI 830 transmitter  
with integrated charging compart-ments  
1 EZT 3011 induction loop  
1 NT 13 mains unit  
with 3 country adapters (EU, UK, US)  
1 connection cable  
with two 3.5 mm stereo jack plugs  
for connection to a headphone socket  
3 audio adapters:  
1 adapter 3.5 mm to ¼” (6.3 mm) jack plug  
1 adapter for RCA socket  
1 SCART adapter for SCART socket  
1 lanyard  
1 clip for attaching the receiver  
1 instruction manual  
4
 
 
Product overview  
Product overview  
Receiver  
(see inside cover)  
I
1 Channel indicator  
2 Volume control  
3 On/off button  
4 Balance control  
5 Channel search button  
6 Battery compartment  
7 Socket for headphones,  
induction loop or  
connection cable  
to hearing aid  
Transmitter  
(see inside cover)  
II  
8 Charging compartment for receiver  
9 Charging compartment for optional spare  
rechargeable battery  
0 Charging indicator for optional spare  
rechargeable battery  
A Charging indicator for receiver’s  
rechargeable battery  
B Operation indicator  
C “Speech intelligibility” button  
D Indicator for the selected speech intelligibility  
E Socket (marked blue) for connection of sound  
source or external microphone  
F Mono/stereo slide switch  
G Treble adjustment control  
H DC socket (marked yellow) for connection  
of mains unit  
5
 
   
Putting the Set 830 S into operation  
Putting the Set 830 S into operation  
Setting up the transmitter  
̈ Place the transmitter so that:  
– there are no obstacles in the light path between trans-  
mitter and receiver and  
– transmitter and receiver are not exposed to direct sun-  
light. Direct sunlight may interfere with the reception  
and may damage the transmitter.  
If you are using a plasma TV screen:  
Plasma TV screens radiate an infra-red signal that can  
adversely affect the transmission quality.  
̈ Make sure that the transmitter is placed as far as pos-  
sible from your plasma TV screen.  
̈ If necessary, use a standard extension cable (3.5 mm  
stereo jack plug) to reduce the distance between trans-  
mitter and receiver. This extension cable is available from  
your Sennheiser dealer.  
Note:  
One transmitter can be used to transmit to several  
receivers on the same frequency.  
6
 
     
Putting the Set 830 S into operation  
Connecting the transmitter to a sound source  
̈ Switch your sound source (e.g. TV) off before connecting  
the transmitter.  
I
E
̈ Plug one end of the connection cable I into the blue  
socket E on the transmitter.  
̈ Check the connection possibilities of your sound source  
(e.g. TV).  
Connection  
possibility  
A
B
C
D
Socket on  
sound  
L
R
source  
Name of  
Head- RCA  
SCART  
MKE 800 TV-N  
connection phone socket socket* external  
possibility socket  
microphone*  
A
B
C
̈ Select one of the four connection possibilities  
,
,
D
or  
and follow the instructions in the corresponding  
chapter.  
Note:  
If there are several connections (  
,
or ) available,  
A
B
C
select the SCART socket  
.
C
SCART adapter and microphone are also available as  
*
7
 
 
Putting the Set 830 S into operation  
Connecting the transmitter to a headphone socket  
A
̈ Plug the other end of the connec-  
J
tion cable I into the head-phone  
socket on your sound source.  
I
Is the plug on the connection cable  
too small for the headphone  
socket?  
̈ Plug the adapter to ¼” (6.3 mm)  
jack socket J onto the connection  
cable I.  
̈ Adjust the volume of the headphone socket on your  
sound source to a medium level.  
This improves the quality of cordless sound transmission.  
For detailed information, please refer to the instruction  
manual of your sound source (e.g. TV).  
Note:  
With most TVs, the headphone socket is located at the  
front or sides.  
Connecting the transmitter to an RCA socket  
B
̈ Plug the adapter for RCA  
K
socket K onto the connection  
cable I.  
I
̈ Connect the red connector of  
the adapter K to the red RCA  
socket R of your sound source.  
̈ Connect the white connector of  
the adapter K to the white or  
black RCA socket L of your  
sound source.  
Note:  
With most TVs, the RCA socket is located at the rear.  
8
 
   
Putting the Set 830 S into operation  
Connecting the transmitter to a SCART socket  
C
̈ Plug the SCART adapter L  
L
I
onto the connection cable I.  
̈ Connect the SCART adapter L  
to the SCART socket on your  
TV.  
Note:  
If your TV has several SCART sockets, use the socket  
SCART output.  
Using the MKE 800 TV-N external microphone  
D
Your sound source doesn’t have any of the connections  
mentioned above? You can then use the MKE 800 TV-N  
̈ Directly connect the microphone to the blue socket E on  
the transmitter.  
̈ Position the microphone in front of the loudspeaker of  
your sound source.  
Note:  
You can change the sound by varying the position of the  
microphone in front of the loudspeaker.  
9
 
   
Putting the Set 830 S into operation  
Connecting the transmitter to the mains  
̈ Select the suitable country  
M
adapter N for your wall  
socket.  
̈ Plug the suitable country  
adapter onto the mains  
unit M.  
N
EU  
UK  
US  
̈ Connect the yellow connector  
of the mains unit to the yellow  
socket H on the transmitter.  
H
̈ Plug the mains unit M into a  
wall socket.  
The operation indicator B  
on the transmitter lights up  
green.  
M
Notes:  
– When connecting the transmitter to the mains  
for the first time, charge the rechargeable  
battery for 3 hours as described in the chapter  
3h  
– If there is no audio signal from the sound source for  
about 3 minutes, the transmitter automatically switches  
off. The operation indicator B goes off.  
10  
 
 
Putting the Set 830 S into operation  
Wearing the receiver around the neck  
Use the supplied lanyard P or induction loop Q to wear  
the receiver around your neck.  
Note:  
If you want to use the receiver with your hearing aid,  
attach the induction loop instead of the lanyard.  
̈ If necessary, remove the attach-  
P
ment clip O from the receiver.  
̈ Connect the fasteners of the  
lanyard P to the metal ring at the  
rear of the receiver.  
̈ Wear the receiver around your  
neck, with the Sennheiser logo  
facing away from your body.  
Attaching the receiver to clothing  
̈ Attach the clip O or the clip of the  
induction loop to the receiver as  
shown.  
O
O
̈ Attach the clip O to your clothing  
or belt.  
11  
 
   
Putting the Set 830 S into operation  
Connecting headphones or the induction loop for  
hearing aids to the receiver  
The socket 7 on the receiver allows you to connect  
• headphones,  
• the induction loop Q or  
• a connection cable to your hearing aid.  
7
̈ Connect the corresponding cable to the socket 7 on the  
receiver.  
Q
7
If you want to connect the induction loop Q to the receiver:  
̈ Set your hearing aid to position “T”.  
If your hearing aid has no position “T”, please contact  
your hearing aid acoustician.  
Note:  
For alternative connection possibilities to your hearing  
aid as well as the connection to cochlea implants, please  
contact your hearing aid acoustician.  
12  
 
 
Using the Set 830 S  
Using the Set 830 S  
To switch the Set 830 S system on, proceed as follows:  
1. Switch your sound source (e.g. TV) on. The transmitter  
automatically switches on (see next chapter).  
2. Switch the receiver on (see page 14).  
3. Adjust the desired volume (see page 14).  
Switching the transmitter on/off  
To switch the transmitter on:  
̈ Switch your sound source on.  
The transmitter automatically switches on. The opera-  
tion indicator B lights up green.  
The transmitter doesn’t switch on?  
To switch the transmitter off:  
̈ Switch your sound source off.  
The transmitter automatically switches off after  
3 minutes. The operation indicator B goes off.  
To disconnect the transmitter from the mains:  
̈ Pull out the mains connector from the wall socket.  
Note:  
When not using the transmitter for extended periods of  
time (e.g. when you are on holiday), pull out the mains  
connector from the wall socket. In this case, however, the  
receiver’s rechargeable battery will not be recharged.  
13  
 
   
Using the Set 830 S  
Switching the receiver on/off  
Hearing damage due to high volumes!  
CAUTION!  
This receiver allows you to set higher  
volumes than conventional headphones.  
This can cause hearing damage in persons  
with healthy hearing and especially in  
children.  
̈ Before using the receiver, set the volume  
on the receiver to a low value.  
̈ Do not continuously expose yourself to  
high volumes.  
Switching the receiver on  
1
̈ Press the on/off button 3.  
The channel indicator 1 lights up.  
Switching the receiver off  
̈ Press the on/off button 3.  
3
The channel indicator 1 goes off.  
Notes:  
– For how to store and charge the receiver, see  
3h  
– If you are not within the range of the trans-  
mitter, the receiver automatically switches off  
after 3 minutes.  
Adjusting the volume  
̈ Use the volume control 2 to adjust  
the volume to a sufficient and com-  
fortable level.  
14  
 
   
Using the Set 830 S  
Searching for a sound source  
̈ Switch the receiver on.  
Do you hear the desired sound source?  
Yes: The receiver has already found the sound source.  
No:  
1
5
̈ Briefly press the channel search  
button 5.  
The sound source is searched for.  
On the receiver, the channel indi-  
cator 1 can light up as follows:  
Channel  
Frequency  
You hear  
indicator  
the sound in  
2.3+2.8 MHz  
2.3 MHz  
stereo  
mono  
2.8 MHz  
̈ If you still haven’t found your sound source, press the  
channel search button once more.  
You cannot find your sound source?  
Note:  
The channel indicator goes off after 30 seconds so  
that the light won’t disturb you in a dark room.  
Adjusting the balance  
The balance control allows for right/left  
4
volume adjustment. Adjust the balance  
so that you hear equally well with both  
ears.  
̈ Turn the balance control 4 to the  
left L or right R in order to increase the  
volume for the corresponding ear.  
15  
 
   
Using the Set 830 S  
Switching between mono and stereo operation  
If, despite a correct balance adjustment, you can hear the  
sound only with one ear:  
̈ Set the ST/MO switch F on the  
transmitter to MO (mono).  
F
Meaning of the terms “mono” and “stereo”  
Stereo (ST)  
Mono (MO)  
L
R
L + R  
Example: L: Speech from the left  
R: Music from the right  
You hear speech from  
the left and music from  
the right.  
You hear speech and music  
coming from the front.  
16  
 
   
Using the Set 830 S  
Individually enhancing the speech intelligibility  
The “speech intelligibility” button  
allows you to adjust the  
sound to your individual needs.  
D
C
C
Try out which setting works best for  
you.  
̈ Press the “speech intelligibility” button C  
until the  
sound is optimally adjusted to your needs.  
Press the  
button  
1 x  
2 x  
3 x  
4 x  
Indicator D  
lit yellow  
Setting  
1
2
3
Default setting  
If necessary, you can have the speech intelligibility fine  
adjusted to your hearing ability (see page 26).  
17  
 
 
Using the Set 830 S  
Storing and charging the receiver  
̈ After use, place the receiver into  
the transmitter’s charging compart-  
ment 8 without exerting too much  
pressure.  
When the receiver is placed correctly  
into the charging compartment, the  
indicator A lights up:  
8
B
A
red: The battery is being charged.  
green: The battery is fully charged.  
Notes:  
– With a fully charged battery, the operating time is up  
to 12 hours.  
– If you have several receivers, they can be used during  
charging.  
– Always store the receiver in the transmitter’s charging  
compartment 8 to ensure that it is fully charged. The  
intelligent battery charging technology prevents over-  
charging.  
18  
 
 
Using the Set 830 S  
Charging a rechargeable battery in the  
transmitter’s charging compartment  
You can charge the receiver’s rechargeable battery or a  
spare BA 300 rechargeable battery (not included in the  
delivery of the Set 830 S) in the charging compartment9  
at the side of the transmitter.  
The spare battery offers extended listening time while the  
discharged first battery is being recharged.  
Note:  
Before using the spare rechargeable battery for  
the first time, charge it for at least 3 hours.  
3h  
Removing and charging the receiver’s battery  
To remove the receiver’s battery:  
̈ Pull the battery out of the receiver’s  
battery compartment 6.  
6
̈ Insert the receiver’s battery into the  
9
charging compartment 9 at the side  
of the transmitter as shown.  
When the battery is inserted correctly  
into the charging compartment, the  
indicator 0 lights up:  
0
red: The battery is being charged.  
green: The battery is fully charged.  
̈ Slide the battery into the receiver’s  
battery compartment 6 as far as it  
will go.  
6
19  
 
   
What if...  
What if...  
...this indicator lights up?  
Indicator  
Status  
Meaning  
Channel  
indicator 1  
on the receiver  
lit yellow Receiver has just been  
switched on or a button  
has just been pressed.  
off  
Receiver is switched on  
for more than 30 secs.  
and no button has been  
pressed.  
Receiver is switched off.  
Operation  
indicator B  
on the trans-  
mitter  
lit green Transmitter is  
switched on.  
off  
Transmitter is  
switched off.  
Charging  
indicator A  
Charging  
lit red  
Rechargeable battery  
is being charged.  
lit green Rechargeable battery  
is fully charged.  
indicator 0  
“Speech  
lit yellow Speech intelligibility  
enhancement is  
intelligibility”  
indicator D on  
the transmitter  
switched on.  
off  
Speech intelligibility  
enhancement is  
switched off.  
...you press this button?  
Button  
Function  
see  
page  
Channel search Searches for the sound source  
or a different channel.  
button 5 on  
the receiver  
“Speech  
intelligibility”  
Selects one of the possible  
settings in order to  
individually enhance the  
speech intelligibility.  
button C on  
the transmitter  
20  
 
     
What if...  
...you change the position of this control/switch?  
Control/switch  
Function  
see  
page  
Reduces or increases the  
volume of the receiver.  
Volume control 2  
on the receiver  
Increases the volume for the  
left or the right ear.  
Balance control 4  
on the receiver  
Mono/stereo slide Sets the transmitter to mono  
or stereo operation.  
switch F on the  
transmitter  
Treble adjustment Treble adjustment is only to  
be made by a hearing aid  
technician / an expert.  
control G on the  
transmitter  
...you hear acoustic signals or warning signals?  
Acoustic signal  
3 ascending beeps  
Meaning  
The receiver has just  
been switched on.  
3 descending beeps The receiver has just  
been switched off.  
1 acknowledgement The channel search  
beep  
button has been  
pressed once briefly.  
The channel search  
button has been  
pressed for  
6 seconds.  
1–2 short beeps  
The receiver is set to  
channel 1 or 2.  
21  
 
   
What if...  
Warning signal  
Meaning  
6 short  
beeps  
The receiver does not  
receive any signal from  
the transmitter:  
• Transmitter and  
receiver are too distant.  
The receiver switches  
off after 3 minutes.  
• The transmitter is  
switched off.  
2 long  
beeps  
The rechargeable battery  
is almost flat.  
To switch the acoustic signals on  
and off:  
̈ Press the channel search  
button 5 on the receiver for  
approx. 5 seconds.  
5
You hear a short acoustic signal.  
Note:  
Warning signals cannot be switched off.  
22  
 
 
Cleaning the Set 830 S  
Cleaning the Set 830 S  
Cleaning the transmitter and the receiver  
Liquids can damage the electronics of the  
devices!  
CAUTION!  
Liquids entering the housing of the devices  
can cause a short-circuit and damage the  
electronics.  
̈ Keep all liquids far away from the devices.  
̈ Do not use any cleansing agents or sol-  
vents.  
̈ Before cleaning, disconnect the transmitter from the  
mains.  
̈ Use only a slightly damp cloth to clean the devices.  
If a problem occurs ...  
The transmitter does not switch on  
Possible cause  
Solution  
Is the mains unit  
Check the connection of the mains  
connected correctly? unit to the transmitter and to the  
Is the sound source Switch your sound source on.  
switched on?  
Is the volume of  
the sound source  
sufficient?  
Set the volume on your sound  
source to a medium value.  
Is the transmitter  
set to operating  
mode 2  
Take the receiver out of the  
charging compartment.  
The transmitter automatically  
switches on.  
23  
 
       
If a problem occurs ...  
You cannot hear anything  
Possible cause  
Solution  
Is there a free line  
of sight between  
receiver and  
Remove obstacles in the light path  
between receiver and transmitter.  
transmitter?  
Are transmitter and Avoid exposure to direct sunlight.  
receiver exposed to  
direct sunlight?  
Is the receiver still  
within the  
Move the receiver closer to the  
transmitter. If necessary, switch  
transmitter’s range? the receiver on again.  
Are all connectors  
Check the connection between the  
connected correctly? transmitter and your sound source  
(see page 7).  
Is the operation  
indicator B lit?  
Check if the transmitter is switched  
Is the transmitter  
set up the wrong  
way round?  
Set up the transmitter so that  
the cables are guided away from  
Does the receiver’s Wear the receiver the right way  
Sennheiser logo face round, with the Sennheiser logo  
the transmitter?  
facing the transmitter.  
Is the volume of  
the sound source  
sufficient?  
Set the volume on your sound  
source to a medium value.  
Is the volume of the Increase the volume by turning  
receiver sufficient?  
the volume control 2 on the  
receiver (see page 14).  
Is the rechargeable  
battery inserted  
properly into the  
receiver and fully  
charged?  
Check if the channel indicator 1  
is lit. If it is not lit: recharge  
the rechargeable battery  
(see page 19).  
Remove the rechargeable battery  
and reinsert it into the receiver.  
If this doesn’t help: recharge  
the rechargeable battery  
(see page 19).  
24  
 
 
If a problem occurs ...  
You hear the sound only with one ear  
Possible cause  
Solution  
Is the balance  
Turn the balance control 4 to  
adjusted correctly?  
Is the transmitter  
set to mono?  
Set the mono/stereo switch F on  
the transmitter to the left  
The sound of your sound source is hardly intelligible  
Possible cause  
Solution  
Is the speech  
intelligibility  
enhancement out  
of adjustment?  
Press the “speech intelligibility”  
button C on the transmitter  
until the sound is optimally  
adjusted to your needs  
Do you use a  
plasma TV screen?  
Make sure that the transmitter is  
placed as far as possible from your  
You do not hear the Press the channel search button 5  
desired channel?  
on the receiver to restart the search  
for your desired channel.  
Is the receiver still  
within the trans-  
mitter’s range?  
Move the receiver closer to the  
transmitter. If necessary, switch  
the receiver on again.  
25  
 
 
Additional technical information  
The loudspeakers of your TV are muted  
Possible cause  
Solution  
Some TVs have a  
Via the operating menu of your TV,  
function that mutes check if and how the muting func-  
the loudspeakers  
when you connect  
a transmitter.  
tion can be deactivated.  
Use either a different audio socket  
on your TV or use the MKE 800 TV-N  
If a problem occurs that is not listed in the above tables or  
if the problem cannot be solved with the proposed solu-  
tions, please contact your Sennheiser partner for assis-  
tance.  
Additional technical information  
Fine adjusting the speech intelligibility  
The speech intelligibility can be enhanced individually on the trans-  
mitter (see page 17).  
There are the following settings:  
Setting  
Indicator D Fine adjustment  
lit yellow  
1
Compression  
2
3
Treble boost  
Compression and treble boost  
Default  
setting  
No fine adjustment made  
26  
 
   
Additional technical information  
Compression (settings 1 and 3)  
Deterioration of the ability to hear quiet sounds as well as loud ones is  
a typical symptom of old age. Compression compensates for these  
volume differences by boosting the volume of quiet sounds and  
reducing the volume of loud sounds if necessary.  
Compression seems to put the speech in the foreground, making it  
easier to understand.  
Compression is self-regulating; once it has been activated, it is not  
necessary to make any other settings.  
Treble boost (settings 2 and 3)  
Another typical age-related phenomenon is the deterioration of the  
hearing with regard to high frequencies. However, high frequencies are  
important for the intelligibility of speech.  
The treble boost makes the speech clearer and easier to understand.  
With the treble boost (settings 2 and 3), additional fine adjustment is  
possible using the treble boost control G on the rear of the trans-  
mitter.  
̈ Use a screwdriver to turn the treble boost  
control G to the left or right until the sound  
can be heard very well.  
The position “0” corresponds to a minimum  
boost, the position “MAX” corresponds to a  
maximum boost, and the control is factory-  
preset to the medium position.  
G
Function of the treble boost control  
By means of the transmitter’s steplessly adjustable treble boost  
control G, the audio signal is boosted as shown in the diagram. The  
treble boost control G allows you to select one of the curves shown in  
the diagram below.  
dB  
20  
“MAX”  
10  
Factory-preset  
setting  
“0”  
0.1  
1
10  
kHz  
27  
 
     
Additional technical information  
Changing the operating mode  
The transmitter can be set to a different operating mode. This is useful  
when the sound of your sound source is very low and the transmitter  
therefore does not always switch on automatically.  
̈ Press the “speech intelligibility” button C  
D
for approx. 5 seconds.  
C
The indicator D goes off. The charging indi-  
cator for the spare rechargeable battery 0  
flashes several times:  
red: operating mode 2  
green: operating mode 1 (factory-preset)  
If the operating mode was changed success-  
fully, the charging indicator for the spare  
rechargeable battery 0 goes off and the  
indicator D lights up again.  
0
Particularities of operating mode 2:  
In operating mode 2, the transmitter is not switched on by the sound  
signal from the sound source.  
To switch the transmitter on:  
̈ Take the receiver out of the charging compartment.  
To switch the transmitter off:  
̈ Place the receiver into the charging compartment.  
If – in operating mode 2 – you want to use a second receiver and charge  
its rechargeable battery during operation:  
̈ Pull the battery out of the receiver’s battery  
compartment 6.  
̈ Slide the battery into the transmitter’s  
charging compartment 9 as far as it will go.  
6
9
28  
 
 
Accessories and spare parts  
Accessories and spare parts  
CAUTION!  
Danger of damage to the device!  
Components from other manufacturers (e.g.  
for power supply or rechargeable battery)  
may cause damage to the device and will  
invalidate the warranty!  
̈ Use only use original Sennheiser accesso-  
ries and spare parts.  
Do you wish to use additional receivers?  
The following receivers are available from your specialist  
dealer:  
Cat. No. Accessory/spare part  
502021 RI 830 S receiver  
502020 RI 830 stethoset receiver  
502023 RI 900 stethoset receiver  
29  
 
 
Accessories and spare parts  
The following Set 830 S accessories are available from your  
specialist dealer:  
Cat. No. Accessory/spare part  
HZL connection cables  
001676 HZL 30-6  
(3.5 mm jack plug to 1 mini-plug, 40 cm)  
004658 HZL 30-600  
(3.5 mm jack plug to 1 mini-plug, 60 cm)  
001678 HZL 32-6  
(3.5 mm jack plug to 2 mini-plugs, 40 cm)  
004657 HZL 32-600  
(3.5 mm jack plug to 2 mini-plugs, 60 cm)  
002408 HZL 34-6E  
(3.5 mm jack plug to 1 Euro plug, 40 cm)  
004652 HZL 34-600E  
(3.5 mm jack plug to 1 Euro plug, 60 cm)  
002409 HZL 36-6E  
(3.5 mm jack plug to 2 Euro plugs, 40 cm)  
004653 HZL 36-600E  
(3.5 mm jack plug to 2 Euro plugs, 60 cm)  
003448 EZI 120 induction couplers  
528184 Clip for attaching the receiver  
528185 Lanyard  
500898 BA 300 spare rechargeable battery  
517627 Extension cable, 3 m  
(3.5 stereo jack plug)  
500974 MKE 800 TV-N external microphone (mono)  
502566 EZT 3011 induction loop  
30  
 
Specifications  
Specifications  
System  
Modulation  
Carrier frequencies  
Frequency response  
THD  
FM, stereo  
2.3 MHz/2.8 MHz  
50 Hz–16,000 Hz  
< 1 %  
Charging time for  
rechargeable battery  
approx. 3 hours  
Signal-to-noise ratio  
(1 mV, peak deviation) typ. 75 dB(A)  
Operating temperature 10°C to 40°C  
Transmitter  
Range  
up to 12 m within a room  
3.5 mm stereo jack socket  
Audio/microphone  
connection  
Power supply  
13.5 V DC/500 mA  
via NT 13 mains unit  
Weight  
approx. 260 g  
Dimensions  
approx. 115 x 145 x 40 mm  
Receiver  
Audio connection  
Max. SPL  
3.5 mm stereo jack socket  
125 dB (SPL)  
Power supply  
via BA 300 rechargeable Li-Ion  
battery (3.7 V / 150 mAh)  
Operating time  
Weight  
up to 12 hours  
approx. 50 g (incl. BA 300)  
approx. 72 x 60 x 25 mm  
Dimensions  
31  
 
 
Specifications  
NT 13 mains unit  
Nominal input voltage  
Mains frequency  
100 V~ to 240 V~  
50–60 Hz  
Max. power consumption 2.4 W (incl. battery charging)  
Nominal output voltage 13.5 V DC  
Nominal output current 500 mA  
Standby consumption  
approx. 0.9 W  
(w/o battery charging)  
Ambient temperature  
+5°C to +40°C  
The devices comply with the following standards:  
Europe  
EMC: EN 55013, EN 55020  
Safety: EN 60065, EN 61558, EN 60950  
USA  
47CFR15_B  
Canada IC ICES-003  
32  
 
Manufacturer Declarations  
Manufacturer Declarations  
Warranty  
Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on  
this product. For the current warranty conditions, please visit our web  
CE Declaration of Conformity  
This equipment is in compliance with the essential requirements  
and other relevant provisions of Directives 2004/108/EC and  
2006/95/EC.  
Batteries or rechargeable batteries  
Please dispose of exhausted batteries and rechargeable bat-  
teries as special waste or return them to your specialist dealer.  
WEEE Declaration  
Please dispose of this product at the end of its operational life-  
time by taking it to your local collection point or recycling centre  
for such equipment.  
Statements regarding FCC and industry Canada  
This equipment has been tested and found to comply with the limits for  
a Class B digital device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against  
harmful interference in a residential installation. This equipment gener-  
ates, uses and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful inter-  
ference to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment  
does cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the  
following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that  
to which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
This class B digital apparatus complies with the Canadian ICES-003.  
Changes or modifications made to this equipment not expressly  
approved by Sennheiser electronic Corp. may void the FCC authoriza-  
tion to operate this equipment.  
33  
 
 
Index  
Index  
Receiver  
Adjusting the balance 15  
Adjusting the volume 14  
Attaching the receiver to clothing 11  
Channel indicator (meaning) 20  
Cleaning 23  
Indicators (meaning) 20  
No sound signal 24  
Operating time 18  
Sound only audible with one ear 25  
Storing and charging the receiver 18  
Switching the acoustic signals off 22  
Switching the receiver on/off 14  
Wearing the receiver around the neck 11  
Rechargeable battery  
Replacing and charging the rechargeable battery 19  
Special functions  
Changing the operating mode 28  
Fine adjusting the speech intelligibility 26  
Treble boost control 27  
Terms  
Compression/treble boost 27  
Mono/stereo 16  
Transmitter  
Cleaning 23  
Connection to a headphone socket 8  
Connection to a SCART socket 9  
Connection to a sound source 7  
Connection to an RCA socket 8  
Connection to the mains 10  
Enhancing the speech intelligibility 17  
Installation 6  
Operation indicator (meaning) 20  
Switching between mono and stereo operation 16  
Switching the transmitter on/off 13  
Troubleshooting 23  
Using the MKE 800 TV-N external microphone 9  
34  
 
 
 
Sennheiser electronic GmbH & Co. KG  
Am Labor 1, 30900 Wedemark, Germany  
Printed in China  
Publ.07/08  
528251/A01  
 

Sony Car Speaker XS A1025 User Manual
Sony Ericsson Cell Phone J110c User Manual
Sony Ericsson Cell Phone k310c User Manual
Sony MiniDisc Player MDX 6XLP User Manual
Sony Music Mixer XDCAM User Manual
Sony Security Camera SNC DH180 User Manual
Sony Video Game Console CECH 2002A User Manual
Stiga Tiller 75 G User Manual
Swann DVR dvr4 1000 User Manual
Swann Security Camera SW245 SMD User Manual